Maintenance Manual for Laser Cutting Machine Equipment

How to maintain a laser cutting machine in daily work? How can we extend the service life of laser cutting machines and better save production costs? We can classify according to regular maintenance intervals
1、 Daily maintenance requires attention to the following aspects:
1. Clean the cutting head and nozzle
2. Confirmation of returning to the reference origin
3. Regularly check the coaxiality between the nozzle and the laser (optical center)
4. Check if the cutting air pressure is normal
5. Check the air supply system for leaks and pressure
6. Check the filtration and drainage of air at all levels
7. Check if there is any leakage in the waterway
8. The air storage tank needs to be drained every day
9. Check whether the equipment has accumulated dust
2、 Weekly maintenance, attention should be paid to:
1. Clean the X and Y axis rack guide rails
2. Check the tightness of the exchange workbench chain
3. Check if there is any water in the filter that has not been drained
4. Check the proximity switch and bracket collision block of the exchange workbench
5. Check if there are any foreign objects on the surface of each proximity switch
6. Cleaning and troubleshooting the car
7. Clean foreign objects on the exchange workbench guide rail and machine tool
8. Check the operation panel buttons and emergency stop buttons
3、 Monthly maintenance, please note:
1. Lubricating the rack
2. Check whether all components in the electrical cabinet are working properly and clean dust
3. Check if the connectors of the cutting head are loose
4. Clean the dust accumulation on the CNC control unit
5. Check if the motor shaft cable plug is loose and clean
6. Check if the X and Y axis rack surfaces are clean
7. Check if the air compressor is working properly
8. Check if the chiller needs to be replaced

With the acceleration of modern industrialization, the application of laser technology has gradually matured, and fiber laser cutting machines are one of the laser products. For new users who may have some doubts, Baiwei Laser will provide you with an answer below.

The purpose and application range of laser cutting machines

Laser cutting uses a beam of light instead of traditional mechanical knives for processing. It has the characteristics of high accuracy, fast cutting, not limited to cutting pattern limitations, automatic layout saving materials, smooth cuts, and low processing costs.

Why is it not recommended to purchase a second-hand laser cutting machine?

The lifespan of the fiber laser is lost, the laser power decreases, and the cutting efficiency decreases. Laser, as one of the core components of laser cutting machines, is very expensive. The laser power of a laser cutting machine that has been used for a long time will gradually decay. If this laser cutting machine is used for a long time, the laser power may weaken significantly. If the laser power decreases, the cutting thickness decreases, and the cutting speed will also decrease accordingly. The cost of replacing the laser is significant.

How to choose auxiliary gas for fiber laser cutting machines?

Laser cutting machines have broken traditional processing methods and are widely used in various industries with new cutting methods. Users who understand fiber laser cutting machines should know that they often use auxiliary gas during the cutting process, which is why many people are more concerned about the issue of "gas".

How to choose a laser cutting machine

Before deciding to purchase equipment, it is important to clarify one's own processing needs, processing materials, thickness, format, and other issues. Laser cutting machines mainly have low power, medium power, high power, and newly developed ultra-high power in recent years. The size of the cutting width of the board also determines the differences in the processing table of the laser equipment. In short, it is better to choose based on one's own processing requirements.

How to maintain a laser cutting machine?

For users who have already purchased laser cutting machines, the maintenance of laser cutting machines is a matter of concern. Due to the fact that the price of a laser cutting machine ranges from tens of thousands to millions, it is truly valuable. Therefore, using a good laser cutting machine can achieve twice the result with half the effort. Maintaining a good laser cutting machine can greatly save users' usage costs.

< 1...7 8 9 10 >

Leading CNC

About us

Contact

Products

Fiber Laser Cutting Machines

Fiber Laser Marking Machines

Fiber Laser Cleaning Machines

Fiber Laser Welding Machines

Fiber Laser Machine Accesones

Sales manager

Jessica
E-mail: jessica@leadinglaserinc.com
Phone : +8613280023931

Whatsapp：+8613280023931

Office Address: 24F, Building 3, Aosheng Building, High-tech Zone, Jinan City, Shandong Province